Graphite powder BT40, carbon min. 99.6%, 7782-42-5, pure, synthetic, anthracite, super fine powder

Lithium carbonate is used, among other things, in glass production, in the ceramics industry and in metallurgy used. It is used as a melting flux and to increase the melting points of glasses and ceramics. In metallurgy, lithium carbonate is used to produce lithium metal and lithium compounds (lithium hydroxide, also with us available) used.  Chemical/physical analysis values (typical) Appearance: White, very dusty powder insoluble. in / insol. in HCL [%]: 0.0001 Ca[%]: 0.01 Cl [%]: 0.01 SO4 [%]: 0.01 H2O [%]: 0.24 Na [%]: 0.05 K [%]: 0.004 Signal word: Attention! Danger information H302 Harmful if swallowed. H319 Causes serious eye irritation. Safety instructions P264 Wash skin thoroughly after use. P270 Do not eat, drink or smoke when using. P280 Wear eye/face protection. P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove any contact lenses. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention.

Lithium hydroxide monohydrate is used in various industries including aerospace, pharmaceutical and ceramics industries. In aerospace, it is used as a carbon dioxide absorber in spacesuits and in spacecraft atmosphere control. In the pharmaceutical industry it is used as a component of lithium medications. In the ceramics industry it is used as a glass flux and to increase the melting points of glasses and ceramics.Chemical/physical analysis values (typical) Property Unit Result LiOH % 57.00 SO4 % 0.01 Fe2O3 % <0.0007 Cl % 0.002 NaOH % 0.02 CO2 % 0.10 CaO % 0.008 unsolvable in / insol. in HCL % <0.008 Signal word: Danger!Danger information H302 Harmful if swallowed. H319 Causes serious eye irritation. Safety instructions P264 Wash skin thoroughly after use. P270 Do not eat, drink or smoke when using. P280 Wear eye/face protection. P301 + P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. If possible, remove any contact lenses. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention.

Hexagonal boron nitride, or h-BN for short, is a high-performance inorganic material made of boron and nitrogen. The material has a characteristic hexagonal crystal structure and, due to its white appearance and layered structure, is often referred to as white graphite. Like graphite, hexagonal boron nitride exhibits excellent lubricity and can be used as a functional material in many technical applications. A significant advantage of h-BN is its high thermal and chemical stability. The material is suitable for applications at high temperatures and under demanding environmental conditions. Furthermore, hexagonal boron nitride is characterized by low wettability with many melts, good thermal shock resistance, and excellent electrical insulation properties. Depending on its purity, grain size, and processing form, h-BN can be used as a powder, coating, molded body, or component of ceramic materials. General Applications of Hexagonal Boron Nitride Due to its versatile properties, hexagonal boron nitride is used in numerous industries. In the aerospace industry, h-BN is used, among other things, as a temperature-resistant material and for thermal and electrical insulation. Hexagonal boron nitride also plays an important role in the electronics industry because it can dissipate heat while simultaneously acting as an electrical insulator. This makes the material suitable, for example, for thermally stressed insulation components and applications in modern semiconductor technologies. In the ceramics industry, h-BN is used to produce high-performance ceramics, refractory materials, and temperature-resistant components. Its low wettability to molten glass and metal also makes hexagonal boron nitride a suitable high-temperature mold release agent. It is used, for example, in the casting and processing of glass, as well as in other thermal manufacturing processes. h-BN offers a practical alternative for applications where a clean separation between the workpiece and the mold is required. The properties of platinum cannot, of course, be fully achieved. Hexagonal boron nitride in nanotechnology and semiconductor technology Hexagonal boron nitride is also used in nanotechnology and in the development of modern semiconductor devices. Its electrical insulation, thermal stability, and layered material structure make h-BN interesting for various research and industrial applications. Particularly with suitable material quality, hexagonal boron nitride can be used as a component of coatings, insulating layers, and special ceramic composites. In particularly pure and appropriately tested quality, h-BN can also be of interest for biomedical applications. However, suitability for implants, prostheses, or other medical products always depends on the specific purity, processing, material quality, and approval. The hexagonal boron nitride we supply is of technical grade and is therefore primarily intended for industrial, technical, and commercial applications. Technical Boron Nitride for Demanding Applications Our hexagonal boron nitride (h-BN) is suitable for numerous applications where a combination of temperature resistance, electrical insulation, chemical stability, and good release properties is required. Whether as a raw material for ceramic products, as a component of technical coatings, as a high-temperature mold release agent, or for applications in the electronics and semiconductor industries – h-BN is a versatile material for demanding industrial processes.  

Molybdenum disulfide is a naturally occurring mineral, referred to in its natural form as molybdenite or jordisite. Its excellent lubricating properties are based on its layered molecular structure. Strong atomic bonds form exclusively within the atomic layers, while significantly weaker van der Waals forces exist between those layers. This results in very easy sliding of the individual planes, which can also be observed in graphite.Due to its high effectiveness, approximately 1.0 kg of grease (or about 800–900 ml of lubricating paste) can be produced with just 100 g of MoS2. In gear oils, the proportion is often less than 1%. However, in machine suspensions these proportions can vary considerably. Molybdenum disulfide is a widely used dry lubricant in mechanical engineering. The very soft material adheres particularly well to steel and various metals, making it a durable functional material. The applied film is thermally stable up to approximately 350°C or 450°C and exhibits significant resistance to water and most acids.

Flame sootorCarbon Black / Carbon Black / Lamp Black is produced by burning hydrocarbons with reduced oxygen supply. The flame black powder we offer is typically nanoscale. Among other things, it is also suitable as an extremely opaque black pigment.  This is a prilled version. This means that significantly less dust is created during handling and the material is easier to dose andIn addition, the environmental impact is significantly reduced.Possible applications: Additive in polymers Conductive paints (ESD applications) Polymer-based energy storage Black pigment (e.g. toner) Flame retardant coatings and much more. Chemical/physical examination: Average particle size: 95nm (0.095µm) - based on primary particlesResidue on 45µm sieve: 4ppm Toluene extractable components (DIN 53553): 0.010% CAS No.: 1333-86-4 Variety: 101 Carbon min.: 99.9% Opacity (ISO 787/16 & 24): 26.0% (ITRB) Blackness (DIN 55979): 210 PH value: 7.5 Tamping density: 260 g/l Dibutyl phthalate absorption: 0.118 dm³/100g

This copper powthe is conventionally produced in ball mills. Dazu wird zunächst ein Vorgranulat bzw. -grieß erzeugt, welches im Anschluss of den grinding media zu kleinen plättchenförmigen Partikeln verformt wird. After classification, this is followed by the wet-chemical deposition of pure silver auf the Partikeloberfläche an. So enthält this powthe 5 to 6 wt-%  elemental silver.With the genannten silverbeschichtung is this Material außerordentlich leitfähig and kann dawith weitestgehend in vielen applications reines silverpulver ersetzen. Während unbeschichtetes copper powder, trotz seiner intrinsischen guten electrical conductivity, im losen Zustand einen Widerstand gegen unendlich zeigt, leitet this AgCu-powthe den Strom auch im loosely poured state bereits.The Kernanwendung liegt im Bereich the Manufacturing process of elektrisch leitfähigen coatings, Halbleiter-Bauelementen and Medizintechnik.CAS No.: 7440-22-4 (silver), 7440-50-8 (copper)Typische chemisch and physical Spezifikationen:Sieve passage: min. 99,5 %D10: 15,0 µmD50: 34,0 µmD90: 57,7 µmsilver-content: 5,0 % Purity coppersubstrat: min. 99,9 %Signal word: WARNING!DangerenhinweiseH302 Harmful during VerschluckenH319 Causes serious eye irritationH410 Sehr toxic for aquatic organisms with long-lasting effectsPrecautionary statementsP264 Nach Gebrauch wash skin thoroughly.P273 release in the Umwelt avoid.P280 eye/face protection wear.P337+P313 In case of anhaltenthe Augenreizung: get medical advice/attention.P391 Spilled quantities aufnehmen.P501 contents / container einer anerkannten Abfallentsorgunganlage zuführen.

This As a result, it shows an extraordinarily low oxygen concentration and generally great purity of at least 99.99%.Typical of the manufacturing process, the primary particles are spherical (spherical). We deliver all selectable pack sizes in plastic containers that protect against light and in a protective gas atmosphere.The core application is in the area of the production of electrically conductive adhesives, soldering materials for semiconductor components, thermal pastes and Medical technology.CAS No.: 7440-22-4 (Silver)Typical chemical and physical Specifications Description Specification Appearance Gray powder Ag 99.99 – 100.0% O 0 – 50 ppm Al 0 – 10 ppm Bi 0 – 5 ppm Cd 0 – 10 ppm Cu 0 – 50 ppm Fe 0 – 10 ppm Ni 0 – 10 ppm Pb 0 – 10 ppm Pd 0 – 10 ppm Sb 0 – 10 ppm Sn 0 – 10 ppm Se 0 - 5 ppm Te 0 - 5 ppm Zn 0 – 10 ppm Particle size distribution D10 7.3 μm ISO 13322-2 D50 11.6 μm ISO 13322-2 D90 15.9 μm ISO 13322-2 Particle Shape spherical Hazard information: H228 Flammable solid. H410 Very toxic to aquatic life with long lasting effects. Safety instructions: P210 Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. No smoking. P273 Avoid release to the environment. P391 Collect spilled quantities. P501 Dispose of contents/container in accordance with local/national regulations. Note: Please note that silver powder is for industrial and scientific use only and is not suitable for human consumption.