Aluminium powder "ROGAL 0-10", D50 2 µm, spherical, nitrogen-atomized, CAS No.: 7429-90-5
€4.70
Available, delivery time: 2-5 days
Product information "Aluminium powder "ROGAL 0-10", D50 2 µm, spherical, nitrogen-atomized, CAS No.: 7429-90-5"
This ultra-fine aluminum powder is atomized with nitrogen. As a result, spherical primary particles with a very high degree of sphericity are formed.
The main applications, in addition to sinter metallurgy, brazing technology, and friction materials, are in the field of reactive propulsion systems and energetic materials. It should be noted that although this material is not classified as hazardous goods, it is considered a dual-use product. Relevant export restrictions must be observed.
Please feel free to contact us if necessary.
Typical chemical/physical specifications:
- Al: min. 99.7 %
- D10: approx. 0.8 µm
- D50: approx. 2.2 µm
- D90: approx. 3.5 µm
| CAS-Nr.: | 7429-90-5 |
|---|---|
| material: | Aluminium |
| nominal particle size: | D50 2,2 µm |
| particle shape: | spherical |
| purity: | min. 99,7 % |
| zur GPSR-Informationspflicht: | Hersteller: Schlenk Gmbh, Barnsdorfer Hauptstraße 5, 91154 Roth, info@schlenk.de |
Login
Passend dazu:
This aluminum powder is produced in Europe via atomization with air. It is characterized by irregular primary particles.Preferred areas of applicationFiller in polymer processing (2K systems, filler)Adjusting thermal conductivity in polymers and/or increasing strengthChemical reducing agent / Gas generatorsMetallurgyFiltersPyrotechnicsNot dangerous goods within the meaning of the transport regulationsPurity: 96.9% (Al)Particle shape: irregular, spattery Made from primary aluminumGranulometry: >450µm: 0.4%< 250µm: 8.80% Bulk density: 0.940 g/cm³CAS No.: 7429-90-5
Content: 0.1 Kilogramm (€30.90 / 1 Kilogramm)
Titanium dihydride is an essential component in the production of metal foams. Here, the property is utilized that the hydrogen contained in the hydride releases from the crystal structure at a temperature of approximately 300 to 400°C, causing the surrounding melt to foam. Titanium dihydride is an essential component in the production of metal foams. Furthermore, the material is very frequently used instead of, or sometimes in combination with, zirconium in the production of propellant tablets in airbags. Suitable applications include: hydrogen storage, metal foams, base metal for further alloys, pyrotechnics, and much more. Chemical/physical specifications (typical): Ti: min. 95.0%, H: min. 3.8%, Fe: 0.08%, Mg: < 0.015% Mn: < 0.018% Si: < 0.04% O: < 0.35% N: < 0.25% Granulometry d90 45µm Raw density: 3.75 g/cm³ Signal word:ATTENTION! CAS No.: 7704-98-5UN 3089 Hazard statements: H228: Flammable solid Precautionary statements: P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P402+P404: Store in a closed container in a dry place.
Content: 0.25 Kilogramm (€333.20 / 1 Kilogramm)
CAS No.: 9003-36-5 Sieve residue on 45µm: 90% Flow distance at 125°C: 34 mmMelting point: 84 °CFree phenol: 0.37 %Free water: 0.70 % Signal word: WARNING! Hazard Statements H 315 Causes skin irritation H 317 May cause an allergic skin reaction H 319 Causes serious eye irritation H 411 Toxic to aquatic life with long-lasting effects Precautionary Statements P501 Dispose of contents/container to an authorized waste disposal facility or municipal collection point P302+P352 IF ON SKIN: Wash with plenty of water and soap P332+P313 If skin irritation occurs: Get medical advice/attention P337+P313 If eye irritation persists: Get medical advice/attention P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
Content: 0.1 Kilogramm (€41.50 / 1 Kilogramm)
This copper powder is produced by water atomisation . This results in irregularly shaped primary particles with increased interlocking effect. However, this means that the powder is only suitable to a limited extent for AM processes. Compared to the air-atomised variant, which is also available from us, grade "LD" has an approximately 30% lower bulk density.Further typical fields of application:Antifouling coatingsFriction liningsSintered componentsPlastics engineering (as a filler)Soldering technologyCatalyst (chem.)Silver production (precipitation of silver in silver nitrate solution)Antibacterial / antiviral coatingsPaint coatings (so-called "piss paintings") -> WARNING: This powder is not suitable as a pigment. For this purpose, please use our flake-shaped powdersTypical chemical / physical specifications:Copper: min. 99.6 %Oxygen: max. 0.2 %Particle size distribution (typical)> 149 µm (100 mesh): 0.0 %> 105 µm (140 mesh): 1.6 %> 44 µm (325 mesh): 35.0 %Bulk density: 3.0 - 3.6 g/cm³CAS No.: 7440-50-8 Signal word: WARNING! Hazard statements:H412 Harmful to aquatic life with long lasting effects.Precautionary statements:P273 Avoid release to the environment.P391 Collect spillage.
Content: 5 Kilogramm (€30.00 / 1 Kilogramm)