Aluminum powder 70 µm, flake, stabilized

This copper powthe is specially designed for optical and functional applicationsdeveloped and manufactured worden. This is pure copper, which has been stabilized with 1,5 % oleic acid. In Kunststoffverarbeitung produces outstanding effects in HDPE, LDPE,ABS othe gar PVC. In this context should during the Fertigung of Masterbatches care must be taken to ensure that the powthe nur geringstmöglichen Scherkräften and Verweildauern during hohen Temperaturen ausgesetzt wird. Beide Faktoren könnten sonst the optical Endergebnis negativ beeinflussen. Ebenfalls is this powthe bestens auf den Einsatz in paints/coatings/2K-Harz and screen-printing processes abgestimmt. A ratio of 5/100 (Pigment/Bindemittel) is for ein optisch high-quality result . This produces an impressive copper-metallic effect - the surface sieht anschließend wie ein polished copper sheet aus. Bitte beachten Sie during the processing: screen printing: Maschenweite should drei mal größer als the D90-Wert des powders sein. Aerosol spray cans: Der D90-Wert des powders sollten mindestens drei mal kleiner als the Düsendurchmesser sein. Lacke/paints: Mechanische Einflüsse durch sehr schnell drehende agitators avoid. Dies würde the Partikel beschädigen and den Metallic-Effekt zerstören. Typische chemical and physical Spezifikationen:Purity des Ausgangsmetalls: 99,9 %Laser diffraction: D10 2,75µmLaser diffraction: D50 9µmLaser diffraction: D90 20,5µmBulk density: ca. 0,95 g/cm³Hiding power: ca. 7500 cm³/gAcetone-soluble constituents: 1,5 % (oleic acid)CAS No.: 7440-50-8 Signal word: Danger! Dangerenhinweise H228 - Flammable solid. H302 - Harmful if swallowed H400 - Sehr toxic for aquatic organisms H411 - Toxic for aquatic organisms with long-lasting effects. Precautionary statements P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 - release in the Umwelt avoid. P301+P310 - If swallowed: Sofort Giftinformationszentrum, Arzt anrufen. P330 - Rinse mouth P370+P378 - In case of fire: Metallbrandpulver/Zement/Sand zum Löschen use

This copper powthe is specially designed for optical and functional applicationsdeveloped and manufactured worden. This is pure copper, which has been stabilized with 1,5 % oleic acid. In Kunststoffverarbeitung produces outstanding effects in HDPE, LDPE,ABS othe gar PVC. In this context should during the Fertigung of Masterbatches care must be taken to ensure that the powthe nur geringstmöglichen Scherkräften and Verweildauern during hohen Temperaturen ausgesetzt wird. Beide Faktoren könnten sonst the optical Endergebnis negativ beeinflussen. Ebenfalls is this powthe bestens auf den Einsatz in paints/coatings/2K-Harz and screen-printing processes abgestimmt. A ratio of 5/100 (Pigment/Bindemittel) is for ein optisch high-quality result . This produces an impressive copper-metallic effect - the surface sieht anschließend wie ein polished copper sheet aus. Bitte beachten Sie during the processing: screen printing: Maschenweite should drei mal größer als the D90-Wert des powders sein. Aerosol spray cans: Der D90-Wert des powders sollten mindestens drei mal kleiner als the Düsendurchmesser sein. Lacke/paints: Mechanische Einflüsse durch sehr schnell drehende agitators avoid. Dies würde the Partikel beschädigen and den Metallic-Effekt zerstören. Typische chemical and physical Spezifikationen:Purity des Ausgangsmetalls: 99,9 %Laser diffraction: D10 2,75µmLaser diffraction: D50 6,75µmLaser diffraction: D90 16µmBulk density: ca. 0,90 g/cm³Hiding power: ca. 9000 cm³/gAcetone-soluble constituents: 1,5 % (oleic acid)CAS No.: 7440-50-8 Signal word: Danger! Dangerenhinweise H228 - Flammable solid. H302 - Harmful if swallowed H400 - Sehr toxic for aquatic organisms H411 - Toxic for aquatic organisms with long-lasting effects. Precautionary statements P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 - release in the Umwelt avoid. P301+P310 - If swallowed: Sofort Giftinformationszentrum, Arzt anrufen. P330 - Rinse mouth P370+P378 - In case of fire: Metallbrandpulver/Zement/Sand zum Löschen use

This Brass powder ist speziell für optische und funktionelle Anwendungen hergestellt worden. Es wurde 1,5 % stabilized with 1.5% oleic acid.In der plastics processing erzielt es herausragende Effekte bei HDPE, LDPE,ABS oder gar PVC. Gerade in diesem Bezug sollte bei der Fertigung von masterbatches darauf geachtet werden, dass das Pulver nur geringstmöglichen Scherkräften und Verweildauern bei hohen Temperaturen ausgesetzt wird. Beide Faktoren könnten sonst das optische Endergebnis negativ beeinflussen. Ebenfalls ist dieses Pulver bestens auf den Einsatz in Farben/Lacken/2K-Harz und screen-printingverfahren abgestimmt. Bereits ein Verhältnis von 5/100 (Pigment/Bindemittel) ist für ein optisch hochwertiges Ergebnis ausreichend. Sie erhalten einen beeindruckenden gold-metallic effect - die Oberfläche sieht anschließend wie ein polished brass sheet aus. Please observe the following during processing: screen-printing: The mesh size should be three times larger than the powder D90 value. aerosol spray cans: The powder D90 value should be at least three times smaller than the nozzle diameter. coatings/paints: Avoid mechanical stress from very fast-running agitators. This would damage the particles and destroy the metallic effect. Typical chemical and physical specifications:Purity of the base metal: 99,9 %Colour shade: ReichgoldLaser diffraction: D10 2,75µmLaser diffraction: D50 9µmLaser diffraction: D90 20,5µmBulk density: ca. 0,95 g/cm³Hiding power: ca. 7500 cm³/gAcetone-soluble constituents: 1,5 % (Ölsäure)CAS No.: 7440-50-8 Signal word: Danger! Hazard statements H228 - Flammable solid. H302 - Harmful if swallowed H400 - Very toxic to aquatic life H411 - Toxic to aquatic life with long-lasting effects. Precautionary statements P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 - Avoid release to the environment. P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor. P330 - Rinse mouth P370+P378 - In case of fire: Use metal fire powder, cement or sand for extinction

This Brass powder ist speziell für optische und funktionelle Anwendungen hergestellt worden. Es wurde 1,5 % stabilized with 1.5% oleic acid.In der plastics processing erzielt es herausragende Effekte bei HDPE, LDPE,ABS oder gar PVC. Gerade in diesem Bezug sollte bei der Fertigung von masterbatches darauf geachtet werden, dass das Pulver nur geringstmöglichen Scherkräften und Verweildauern bei hohen Temperaturen ausgesetzt wird. Beide Faktoren könnten sonst das optische Endergebnis negativ beeinflussen. Ebenfalls ist dieses Pulver bestens auf den Einsatz in Farben/Lacken/2K-Harz und screen-printingverfahren abgestimmt. Bereits ein Verhältnis von 5/100 (Pigment/Bindemittel) ist für ein optisch hochwertiges Ergebnis ausreichend. Sie erhalten einen beeindruckenden gold-metallic effect - die Oberfläche sieht anschließend wie ein polished brass sheet aus. Please observe the following during processing: screen-printing: The mesh size should be three times larger than the powder D90 value. aerosol spray cans: The powder D90 value should be at least three times smaller than the nozzle diameter. coatings/paints: Avoid mechanical stress from very fast-running agitators. This would damage the particles and destroy the metallic effect. Typical chemical and physical specifications:Purity of the base metal: 99,9 %Colour shade: BleichgoldLaser diffraction: D10 15,5 µmLaser diffraction: D50 40,5 µmLaser diffraction: D90 79, 0 µmBulk density: ca. 0,95 g/cm³Hiding power: ca. 3200 cm³/gAcetone-soluble constituents: 1,5 % (Ölsäure)CAS No.: 7440-50-8 Signal word: WARNING! Hazard statementsH400 - Very toxic to aquatic life H411 - Toxic to aquatic life with long-lasting effects. Precautionary statements P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 - Avoid release to the environment.P370+P378 - In case of fire: Use metal fire powder, cement or sand for extinction

This copper powder has been specially manufactured for optical and functional applications and stands out due to its excellent brilliance.In plastic processing, it achieves outstanding effects in HDPE, LDPE, ABS, and even PVC. In this regard, special care should be taken during the production of masterbatches to ensure that the powder is exposed to only minimal shear forces and dwell times at high temperatures. Otherwise, both factors could negatively affect the final visual result.This powder is also perfectly suited for use in paints/coatings/2K resin and screen printing applications. A ratio of just 5/100 (pigment/binder) is sufficient to achieve a visually high-quality result. You will obtain an impressive copper-metallic effect – the surface will resemble a polished and reflective copper sheet.Please note during processing: Screen printing: The mesh size should be three times larger than the D90 value of the powder. Aerosol spray cans: The D90 value of the powder should be at least three times smaller than the nozzle diameter. Paints/coatings: Avoid mechanical stress caused by very high-speed stirrers. This would damage the particles and destroy the metallic effect. Typical chemical and physical specifications:Purity of the base metal: 99.9 %Color tone: Copper / RedLaser diffraction: D50 32 - 38 µmBulk density: approx. 0.95 g/cm³Covering capacity: approx. 3200 cm³/gAcetone-soluble components: < 2.0 %CAS No.: 7440-50-8 Signal word: WARNING! Hazard statements H400 - Very toxic to aquatic life H411 - Toxic to aquatic life with long lasting effects. Precautionary statements P273 - Avoid release to the environment. P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER/doctor. P330 - Rinse mouth. P370+P378 - In case of fire: Use metal fire powder/cement/sand for extinguishing.

This brass powder has been specifically manufactured for optical and functional applications and stands out due to its outstanding brilliance. With a medium to coarse particle size, it provides good coverage. This is a special alloy consisting primarily of copper and a small proportion of zinc. The alloy composition and the thermal treatment applied during production give this powder a brownish metallic sheen: the so-called Antique Gold finish!In plastic processing, it achieves outstanding effects in HDPE, LDPE, ABS, and even PVC. Especially in this context, care should be taken during the production of masterbatches to ensure that the powder is exposed to only minimal shear forces and residence times at high temperatures. Otherwise, both factors could negatively affect the final visual result. This powder is also perfectly suited for use in paints/coatings/2K resin and screen-printing processes. Even a ratio of 5/100 (pigment/binder) is sufficient to achieve a visually high-quality result. You will obtain an impressive copper-metallic effect – the surface will subsequently resemble polished and reflective copper sheet metal. Please observe the following during processing: Screen printing: The mesh size should be three times larger than the D90 value of the powder. Aerosol spray cans: The D90 value of the powder should be at least three times smaller than the nozzle diameter. Paints/coatings: Avoid mechanical stress caused by very high-speed mixers. This would damage the particles and destroy the metallic effect. Typical chemical and physical specifications:Purity of base metals: 99.9% (copper), 99.95% (zinc)Color tone: Copper / Antique GoldLaser diffraction: D50 32 - 38 µm (typical)Bulk density: approx. 0.95 g/cm³Covering capacity: approx. 3200 cm³/gAcetone-soluble components: < 2.0%CAS No.: 7440-50-8 (Copper), 7440-66-6 (Zinc) Signal word: WARNING! Hazard statements H400 - Very toxic to aquatic life. H411 - Toxic to aquatic life with long lasting effects. Precautionary statements P273 - Avoid release to the environment. P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER/doctor. P330 - Rinse mouth. P370+P378 - In case of fire: Use metal fire powder/cement/sand to extinguish.

This copper powder has been specifically developed for optical and functional applications and stands out due to its exceptional brilliance. With a medium to coarse particle size, it provides excellent coverage while exhibiting a reduced tendency to generate dust. Thanks to a special thermal treatment, this powder displays an intense orange-tinted copper-metallic color (known as "Ducat Gold"). In plastics processing, it produces outstanding effects in HDPE, LDPE, ABS, and even PVC. When manufacturing masterbatches, special care should be taken to expose the powder to the lowest possible shear forces and residence times at elevated temperatures. Both factors may otherwise negatively affect the final visual appearance. This powder is also ideally suited for use in paints, coatings, 2K resins, and screen-printing applications. A ratio of just 5/100 (pigment/binder) is sufficient to achieve a visually high-quality result. The result is an impressive copper-metallic effect – the finished surface resembles a sheet of polished, mirror-like copper metal. Please observe the following processing recommendations: Screen printing: The mesh size should be at least three times larger than the powder's D90 value. Aerosol spray cans: The powder's D90 value should be at least three times smaller than the nozzle diameter. Paints/coatings: Avoid mechanical stress caused by very high-speed mixers. This may damage the particles and destroy the metallic effect. Typical Chemical and Physical Specifications: Purity of base metal: 99.9% Shade: Copper / orange-tinted Laser diffraction: D50 32 - 38 µm Bulk density: approx. 0.95 g/cm³ Coverage: approx. 2500 cm³/g Acetone-soluble components: < 2.0% CAS No.: 7440-50-8 Signal Word: WARNING! Hazard Statements H400 - Very toxic to aquatic life. H411 - Toxic to aquatic life with long lasting effects. Precautionary Statements P273 - Avoid release to the environment. P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER or physician. P330 - Rinse mouth. P370+P378 - In case of fire: Use metal fire extinguishing powder, cement, or sand to extinguish.

This brass powder is specially manufactured for optical and functional applications. It is coated with 1.5 % oleic acid, which stabilizes it. In plastic processing, it delivers outstanding effects with HDPE, LDPE, ABS, or even PVC. When producing masterbatches, special care must be taken to minimize shear forces and exposure to high temperatures. Otherwise, both factors could negatively impact the final optical result. This powder is also ideal for use in paints, coatings, 2K resins, and screen printing. A pigment-to-binder ratio of 5/100 is sufficient for an optically high-quality finish. The result is an impressive gold-metallic effect, giving the surface the appearance of polished brass sheet. Processing instructions: Screen printing: Mesh size should be at least three times larger than the powder’s D90 value. Aerosol spray cans: The powder’s D90 value must be at least three times smaller than the nozzle diameter. Paints/coatings: Avoid high-speed agitators, as mechanical stress could damage the particles and diminish the metallic effect. Typical chemical and physical specifications: Base metal purity: 99.9 % Alloy composition: ~70 % Cu, 30 % zinc Shade: rich gold Laser diffraction: D10 18.5 µm | D50 42.8 µm | D90 84.0 µm Bulk density: ~0.95 g/cm³ Hiding power: ~2600 cm²/g Acetone-soluble components: 1.5 % (oleic acid) CAS No.: 7440-50-8 Signal word: WARNING! Hazard statements H400 – Very toxic to aquatic life H411 – Toxic to aquatic life with long-lasting effects. Precautionary statements P210 – Keep away from heat, sparks, open flames, and other ignition sources. No smoking. P273 – Avoid release to the environment. P370+P378 – In case of fire: Use metal fire-extinguishing powder, sand, or cement to extinguish.

This Brass powder ist speziell für optische und funktionelle Anwendungen hergestellt worden. Es wurde 1,5 % stabilized with 1.5% oleic acid.In der plastics processing erzielt es herausragende Effekte bei HDPE, LDPE,ABS oder gar PVC. Gerade in diesem Bezug sollte bei der Fertigung von masterbatches darauf geachtet werden, dass das Pulver nur geringstmöglichen Scherkräften und Verweildauern bei hohen Temperaturen ausgesetzt wird. Beide Faktoren könnten sonst das optische Endergebnis negativ beeinflussen. Ebenfalls ist dieses Pulver bestens auf den Einsatz in Farben/Lacken/2K-Harz und screen-printingverfahren abgestimmt. Bereits ein Verhältnis von 5/100 (Pigment/Bindemittel) ist für ein optisch hochwertiges Ergebnis ausreichend. Sie erhalten einen beeindruckenden gold-metallic effect - die Oberfläche sieht anschließend wie ein polished brass sheet aus. Please observe the following during processing: screen-printing: The mesh size should be three times larger than the powder D90 value. aerosol spray cans: The powder D90 value should be at least three times smaller than the nozzle diameter. coatings/paints: Avoid mechanical stress from very fast-running agitators. This would damage the particles and destroy the metallic effect. Typical chemical and physical specifications:Purity of the base metal: 99,9 %Colour shade: ReichbleichgoldLaser diffraction: D10 2,75µmLaser diffraction: D50 9µmLaser diffraction: D90 20,5µmBulk density: ca. 0,95 g/cm³Hiding power: ca. 7500 cm³/gAcetone-soluble constituents: 1,5 % (Ölsäure)CAS No.: 7440-50-8 Signal word: Danger! Hazard statements H228 - Flammable solid. H302 - Harmful if swallowed H400 - Very toxic to aquatic life H411 - Toxic to aquatic life with long-lasting effects. Precautionary statements P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P273 - Avoid release to the environment. P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor. P330 - Rinse mouth P370+P378 - In case of fire: Use metal fire powder, cement or sand for extinction