Skip to main content Skip to search Skip to main navigation

min. 99,50% electrolytic iron powder, ultra pure, P20-80, flaky/irregegular shape

Product information "min. 99,50% electrolytic iron powder, ultra pure, P20-80, flaky/irregegular shape"

During the electrolytic extraction, electric current is passed through an iron(II) or iron(III) salt solution. At the cathode, iron is deposited in the form of fine particles or solid layers. The high-purity iron is then collected,  dried, mechanically crushed, and classified. The process enables precise control over particle size and shape, which is crucial for many applications.
The high purity and exact particle size distribution of the electrolytically produced iron powder lead to increased reactivity:
  • Chemical Reactions: The large specific surface area of the powder promotes reactions with other chemicals. It often serves as a reducing agent in chemical processes, as it readily donates electrons.
  • Catalytic Properties: It can be used as a catalyst in various chemical reactions, especially in those involving the transformation of organic compounds.
Iron is a ferromagnetic material, and the electrolytically produced iron powder retains these properties:
  • High Saturation Magnetization: The purity of the powder leads to high saturation magnetization, which is important for applications requiring strong magnetic fields.
  • Low Coercivity: The small particle sizes result in low coercivity, making the material easy to magnetize and demagnetize.
Through the special manufacturing process, an extremely precise grain distribution is achieved. Dust content has been almost entirely removed.

Application Examples

  • Powder Metallurgy: Production of sintered parts with specific mechanical and magnetic properties.
  • Electronics: In the production of components requiring precise magnetic properties, such as sensors and actuators.
  • Chemical Industry: As a catalyst or reagent in syntheses and industrial processes.
  • Medical Technology: In certain diagnostic procedures.
  • Special Paints: Magnetic wall coatings

Product Specifications:

Iron
min. 99.5% (typical: min. 99.91%)
Carbon< 0.01%
Phosphorus< 0.002%
Sulfur< 0.005%
Silicon< 0.005%
Manganese< 0.001%
Hydrogen Loss (H2 loss)< 0.5%
Also known as: Eisenspäne, Eisenflakes, Eisenstaub, Ultrapure iron powder, electrolytic magnet powder, iron dust
CAS-Nr.: 7439-89-6
Eisen (Fe): mind. 99,5 %
Kohlenstoff: < 0,01 %
Mangan: < 0,001 %
Phosphor: < 0,002 %
Schwefel: < 0,005 %
Si (Silizium): < 0,005 %
Wasserstoffverlust: < 0,5 %
material: Eisen
particle shape: irregular
zur GPSR-Informationspflicht: Hersteller + Verantwortliche Person: Werth-Metall, Ringstr. 41b, 99428 Grammetal, info@werth-metall.de, Hersteller: TOHO ZINC CO., LTD., UD Kamiyacho Building, 3-18-19 Toranomon, Minato-ku, Tokyo 105-0001, Japan, info@toho-zinc.co.jp

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Skip product gallery

Passend dazu

min. 99,9% Kupferpulver, silberbeschichtet, 32µm, nicht stabilisiert, plättchenförmig
Packungsgröße: 50g
Dieses Kupferpulver wird konventionell in Kugelmühlen hergestellt. Dazu wird zunächst ein Vorgranulat bzw. -grieß erzeugt, welches im Anschluss von den Mahlmedia zu kleinen plättchenförmigen Partikeln verformt wird. Nach erfolgter Klassierung schließt eine nass-chemische Abscheidung von reinem Silber auf der Partikeloberfläche an. So enthält dieses Pulver 5 bis 6 Masse-%  elementares Silber.Mit der genannten Silberbeschichtung ist dieses Material außerordentlich leitfähig und kann damit weitestgehend in vielen Anwendungen reines Silberpulver ersetzen. Während unbeschichtetes Kupferpulver, trotz seiner intrinsischen guten elektr. Leitfähigkeit, im losen Zustand einen Widerstand gegen unendlich zeigt, leitet dieses AgCu-Pulver den Strom auch im lose geschütteten Zustand bereits.Die Kernanwendung liegt im Bereich der Herstellung von elektrisch leitfähigen Lacken, Halbleiter-Bauelementen und Medizintechnik.CAS-Nr.: 7440-22-4 (Silber), 7440-50-8 (Kupfer)Typische chemisch und physikalische Spezifikationen:Siebdurchgang: min. 99,5 %D10: 15,0 µmD50: 34,0 µmD90: 57,7 µmSilber-Anteil: 5,0 % Reinheit Kupfersubstrat: min. 99,9 %Signalwort: ACHTUNG!GefahrenhinweiseH302 Gesundheitschädlich bei VerschluckenH319 Verursacht schwere AugenreizungenH410 Sehr giftig für Wasserorganismen mit langfristiger WirkungSicherheithinweiseP264 Nach Gebrauch Haut gründlich waschen.P273 Freisetzung in die Umwelt vermeiden.P280 Augenschutz/Gesichtschutz tragen.P337+P313 Bei anhaltender Augenreizung: ärztlichen Rat einholen / ärztliche Hilfe hinzuziehen.P391 Verschüttete Mengen aufnehmen.P501 Inhalt / Behälter einer anerkannten Abfallentsorgunganlage zuführen.

Content: 0.05 Kilogramm (€500.00* / 1 Kilogramm)

Variants from €6.90*
€25.00*
99,5 % copper powder, air atomized, spherical
Packungsgröße: 500g
This copper powder is produced by air atomisation . This process creates irregular and partly spherical primary particles. Powders obtained by this process show a higher bulk and tap density compared to dendritic powders.Further typical fields of application:Antifouling coatingsFriction liningsPlastics engineering (as a filler)Soldering technologyCatalyst (chem.)Silver production (precipitation of silver in silver nitrate solution)Antibacterial / antiviral coatingsPaint coatings (so-called "piss paintings") -> ATTENTION: This powder is not suitable as a pigment. For this purpose, please use our flake-shaped powdersTypical chemical / physical specifications:Copper: min. 99.5 %Particle size distribution (typical)D10 12.0 - 17.0 μm D50 22.0 - 31.0 μm D90 32.0 - 43.0 μmBulk density: 4.6 to 4.9 g/cm³CAS No.: 7440-50-8 Signal word: WARNING! Hazard statements:H412 Harmful to aquatic life with long lasting effects.Precautionary statements:P273 Avoid release to the environment.P391 Collect spillage. "

Content: 0.5 Kilogramm (€39.00* / 1 Kilogramm)

Variants from €5.20*
€19.50*
New
99,6 % copper powder, 45-LD, irregular, water atomized, lower density
Packungsgröße: 500g
This copper powder is produced by water atomisation . This results in irregularly shaped primary particles with increased interlocking effect. However, this means that the powder is only suitable to a limited extent for AM processes. Compared to the air-atomised variant, which is also available from us, grade "LD" has an approximately 30% lower bulk density.Further typical fields of application:Antifouling coatingsFriction liningsSintered componentsPlastics engineering (as a filler)Soldering technologyCatalyst (chem.)Silver production (precipitation of silver in silver nitrate solution)Antibacterial / antiviral coatingsPaint coatings (so-called "piss paintings") -> WARNING: This powder is not suitable as a pigment. For this purpose, please use our flake-shaped powdersTypical chemical / physical specifications:Copper: min. 99.6 %Oxygen: max. 0.2 %Particle size distribution (typical)> 149 µm (100 mesh): 0.0 %> 105 µm (140 mesh): 1.6 %> 44 µm (325 mesh): 35.0 %Bulk density: 3.0 - 3.6 g/cm³CAS No.: 7440-50-8 Signal word: WARNING! Hazard statements:H412 Harmful to aquatic life with long lasting effects.Precautionary statements:P273 Avoid release to the environment.P391 Collect spillage.

Content: 0.5 Kilogramm (€39.00* / 1 Kilogramm)

Variants from €5.20*
€19.50*
99,9% Wolframpulver < 6,2µm, tungsten powder, 7440-33-7
Packungsgröße: 100g
FORMEL: WCAS-NR.: 7440-33-7    Reinheit: min. 99,9 %  PARTIKELGRÖSSE: FSSS 6,20 µm AL: < 2 ppm  FE: < 5 ppm MO: < 10 ppm SPEZIFISCHE OBERFLÄCHE: 748,6 cm²/g Rohdichte: 19,3 g/cm³Optimale Anwendungsfelder für Wolframmetallpulver:Herstellung von Wolframcarbid - Pulvernpulvermetallurgische Herstellung von Wolframmetall- und Ferrolegierungsprodukten Herstellung von wolframhaltigen Stahl- und Superlegierungsprodukten Herstellung von Wolfram-Kunststoffprodukten mit hoher Dichte Herstellung von wolframhaltigen Diamantwerkzeugen thermisches Spritzen von wolframhaltigen Pulvern oder Drähten Verwendung von Wolframmetallpulver zur Kohlenstoffeinstellung in HartmetallpulvernHerstellung von Wolframdisulfid Herstellung von Explosivstoffen und pyrotechnischen ArtikelnSignalwort: Achtung!Gefahrenhinweise:H228: Entzündbarer FeststoffSicherheitshinweise: P210: Von Hitze/Funken/offener Flamme/heißen Oberflächen fernhalten. Nicht rauchen.P240: Behälter und zu befüllende Anlage erden.P241: Explosionsgeschützte elektrische Anlagen/Lüftungsanlagen/Beleuchtungsanlagen verwenden.P280: Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragen.P370+P378: Bei Brand: Sand oder Spezialpulver zum Löschen verwenden.

Content: 0.1 Kilogramm (€357.00* / 1 Kilogramm)

€35.70*